It is useful to have a device such as a water heater at home.. Yes, then the water will be turned off, then something else will happen, but you will have to worry less and always have warm water. But how to install this very tank, so that later a tragedy does not come out? You need to heed a few tips: Firstly, if there are four fasteners in the configuration, then you need to do four, but not two. Very sad consequences can follow if this whole colossus falls on you. Secondly, if there is a niche (pad) in the tank structure, then it must be fixed on special metal strips with a minimum size of 6 cm. in length and 6mm. Wide. This is also done for your safety..
Your gas water heater has broken and you don’t know what to do? We advise you to repair a gas water heater in St. Petersburg at a low price. If you want to know more detailed information, then follow the link indicated by us.
Thirdly, under no circumstances use flexible hoses to connect the tank to the water supply. Use metal-plastic pipes, or copper. You can also use polypropylene, they are cheaper, but less practical. Fourthly, in order to avoid an accident, install a special tee, which, in case of a malfunction, will block the access of the water supply to the tank. Fifth, install a ground. Perhaps this is the most important point. Always install grounding so that in the event of a water leak, the heating element does not burn out, or, even worse, fire. So, the installation of a water heater lies on your conscience and nothing more. Follow the manufacturers instructions and do not skimp on additional parts.